The Tega riser doorset is a fully pre-hung, inward-opening doorset.

Ready to install; the jib doorset is supplied pre-powder-coated, with all of the doors’ locks and hinges pre-fitted for efficiency.

Fixed into place through the frame to the shaft wall or partition makes it exceptionally quick and simple to install, whilst still achieving up to 2h fire rating and over 40dB acoustic performance.

The single doorset comes fully pre-hung for a quick and simple installation.

The double doorset is provided with a pre-made frame and the door leafs separately for ease of transportation to and around site. The frame is pre-made and the door leafs are quickly and simply clicked into place.

The most popular version the concealed frame allows you to fully conceal your frame providing a almost completely hidden doorset.

Now featuring an increased perforated flange size for better fixing into all types of partition build up.

Where aesthetics are not so key or you may wish to install the doorset after the tape and jointing/plastering the Tega can be provided with a visible frame that is surface mounted on top of the wall surface.

The 3 point locking system is operated by a square key budget lock. The door is supplied with a stainless steel lock insert which does away with ugly plastic bungs and stops scratches around the hole from using the key.

For situations where you require higher security and the ability to lock the door with a euro cylinder can be used.

The euro cylinder used is a standard 55/10 euro cylinder barrel. Selo can provide these as part of the package if required.

The top-centre is sprung loaded which allows you to remove and re-hang the door very simply, once installed the hinge is fully concealed.

Fire rated up to FD120.

If on-site painting is not required the doorset can be powder-coated to smooth finish in any standard RAL colour to a 20% sheen.

For the fully concealed look, the Textured finish is recommended as it can be painted-in with the rest of the wall; concealing the face of the door.

The Textured finish provides the key to the paint, the only preparation work required prior to painting is to clean the door frame of dust and debris.

Once installed the doorset can be wallpapered over to match the surrounding decor if required.

Please seek approval from the Selo team with regards to fire rating.

The Tega doorset has been fire tested for 2 hours for singles and double door configurations.

Important note
To ensure the fire integrity is not compromised it is important that the wall partition is suitable and also the interface between the partition and doorset is correct.

At Selo we are able to provide advice on your partition and interface details to ensure the fire regulations are met properly in conjunction with the Selo doors.  Please contact us on 020 3880 0339 where our Project Consultants would be glad to assist.

The Tega riser doorset is provided with smoke seals pre-installed within the frame, as standard.

On confined, busy sites doors need to be carried by hand a lot of the time. To keep the doorset protected, Tega comes fully protected with polystyrene corners and heat shrink wrapped in heavy duty polythene.

We understand the demanding requirements of a construction site and the damage that can be done once the doorset is installed if not properly protected.

We can provide corrugated plastic protection sheets to be taped to the door faces, protecting them from scuffs and scratches.